Above: Chill out, not blowout. Take care of your tyres.
Flat tyres are a fact of life for bicycles and electric scooters with pneumatic wheels. However, due to the smaller tyres, there is a chance that e-scooters have a higher chance of getting a flat tyre.
While usually not life-threatening (most punctures happen without causing injury), a flat tyre is without exception a frustrating inconvenience. It downgrades a leisurely ride to a sweaty and dusty affair. For riders who commute to work, it tears a big hole in a tightly scheduled day. An enforced trip to the electric scooter store for a replacement costs both time and money.
A punctured tyre is probably the most common ‘technical problem’ an electric scooter rider will ever face. Some riders can suffer multiple punctures over the course of months, weeks or even days. This may lead them to believe that replacements they received were of poor quality.
Unless you choose to ride on solid tyres, you are likely to get a puncture at some point. On the bright side, there are things you can do to reduce the chances of getting a puncture close to zero.
This article shows you how to take care of your tyre and tubes to reduce tyre punctures and flat tires.
To avoid getting a puncture, we must first get to know the pneumatic wheel and understand what causes a puncture.
An escooter pneumatic wheel consists of the outer tyre, and a hidden synthetic rubber inner-tube tucked between the tyre and the wheel rim. The inner tube is the part that holds the air, like a ring-shaped balloon.
The inner tube offers shock absorption and rebound while the tyre on the outside protects the inner tube and offers traction. Many casual cyclists and escooter riders don’t even know the inner tube exists until their first flat tyre.
Above: Outer tyre and inner tube (with pump valve)
Most bicycles and practically all electric scooters with pneumatic wheels use this traditional outer-tyre plus inner-tube combination. For cars and motorcycles, the tyre and tube have merged to become what is called a tubeless tyre.
When a puncture happens, it is the inner tube that is deflated, not the tyre. Unless there is a very big hole in the tyre, most of the time, the tyre can still be used after the inner tube is replaced.
The first type of puncture is caused by foreign objects piercing the tube, called a penetration puncture. Objects like glass, nails, sharp stones or road debris cuts through the tyre and pierce the tube to result in a puncture.
Above: A penetration puncture on an inner tube
The second type is caused by impact with the riding surface, called a pinch puncture. This is usually caused by riding at speed over bumpy surfaces, portholes or hard edges like the corner of a curb. The sudden impact pinches the inner tube between the wheel rim and the hard surface, cutting the tube.
In both types, punctures can vary from tiny pin-prick holes less than a millimetre across to gashes several centimetres long. Small holes may take several hours or days to deflate the tube, while big ones cause immediate deflation and may include a dramatic pop.
Above: Lack of regular maintenance together with a hard and fast riding style is the most common cause of electric scooter tyre punctures
In order for a penetration puncture to happen, the rider will first have to find a sharp object to roll over. (It’s harder to find than you think.) Next, the rider will have to roll over the object in the exact manner for it to pierce into the tyre. Finally, the penetration must be deep enough to cut through BOTH the tyre and the inner tube. Unless your route is mined with caltrops, you will have to be really unlucky for this to happen.
A pinch puncture, however, can happen simply if you don’t take good regular care of your scooter or don’t ride conscientiously.
There are three important things you can do to avoid tyre punctures. To help you remember it, we have organised them with the acronym “AIR”, pun intended. They stand for
A tube sealant is a liquid latex which you can pump into the inner tube through the same valve that is used to inflate the tyre. The fluid sloshes around inside the tube as the wheel spins. When a hole appears, the fluid leaks into the hole and quickly dries, plugging up the leak. It works like how blood clots in a wound to stop bleeding. The sealant can defend against both penetration and pinch punctures.
A sealant like the Tirecare Endurance can plug up multiple punctures as they happen, covering holes several millimetres across (most punctures are quite small). That means a sealant can often save you from a puncture without you even knowing it. A typical bottle of sealant contains enough fluid for a single application to both front and rear tubes. They usually costs less than the price of a replacement tube with labour.
Watch how the tirecare sealant works here:
The usefulness of a tube sealant is more well-known in the cycling community. Sealants are becoming more popular with electric scooter riders, especially the daily commuters who have a lot to lose over a puncture. Considering the price of a bottle of sealant against the inconvenience and cost of tube replacement, it is a no-brainer. Think of it like insurance against flat tyres.
Many good electric scooter or bicycle workshops will have a service to apply sealant to tires, but you should call in advance to check if they will do it for electric scooters.
By “inspect”, we don’t mean troublesome trips to an e-scooter workshop, but routine checks that you can and should do on your own.
The first and most important check is for enough tyre pressure. We cannot overstate the importance of this. This is because the number one cause of tyre punctures for escooters is pinch puncture due to insufficient pressure. When tyre pressure is low, the tube can’t ‘bounce back’ into shape as effectively. This makes it easier for an impact to instantaneously press the wheel rim and riding surface so closely together that they pinch the tube between them, causing a snake-bite shaped rupture with two holes.
Think of a tube of toothpaste with its cap on. If it were half full, it is easier to squeeze the tube until inner surfaces of the tube touch together than with a full tube of toothpaste. With enough tyre pressure, the tube can do its job of absorbing vibration and resisting the compression without being damaged.
A bicycle pump with pressure gauge is very useful to maintain sufficient tyre pressure
The best way to check for proper tyre pressure is to use a standard bicycle pump with a gauge, like the Beto floor pump. The gauge takes the guesswork out of your effort. Plug in the nozzle to your tyre valve to check the pressure once every fortnight if you ride regularly. Most electric scooter tyres perform best between 40 to 60 psi. If the needle falls below 40 psi, give the pump a few squeezes to bring it up to pressure. You will not regret the effort.
As a bonus, fully inflated tyres also confer a big positive impact on energy efficiency. A more fully inflated tyre has as stronger rebound for more speed and smaller surface in contact with the ground for reduced drag.
Above: Always follow the pressure recommendation of the tube and tire manufacturer
For heavier riders, keep the pressure slightly on the high side to compensate against gravity. You may need a torchlight to see read the maximum pressure on your tyre clearly.
The second check/inspection is for outer tyre condition. This is straightforward. Worn out tyres are thinner and easier for a sharp object to pierce through, resulting in a penetration puncture. It is very common for electric scooter riders to literally ride the tyres to death without knowing it. The most practical indicator for roadworthiness of the tyres is the condition of the thread.
Above: Worn tyres (left) have shallow grooves in the thread, and may even be threadbare. Fresh tyres (right) have clear and deep grooves to effectively drain water and grip the road surface.
The thread refers to the grooves moulded into the tyre, mainly to drain water. On a new tyre, the grooves are crisp, clearly visible and deep. On worn tyres, they tend to be shallow or have been completely worn away. Generally, if you have to look closely to see the grooves, your tyres are worn out. Worn tyres are not just easier to get punctured, they are also more slippery on wet or sandy surfaces. Get them changed. Remember: you can choose to pay for a tyre change before or after losing some skin. Both cost the same, but one hurts more.
Aside from the exterior, old tyres may be worn out on the inside surface. This wear-and-tear may include rough surfaces or frayed fibres on the inner surface of the tyre which causes abrasion on the inner tube, wearing it down. This check is not easy to do on your own and is usually done in workshops as part of a tube change. If in doubt, bring the scooter in for a tyre change. A workshop visit at a time of your choosing is far better than one imposed suddenly upon you by a tube puncture.
The third inspection is for particles lodged in the thread / grooves of your scooter tyre, or perhaps embedded into the material of the tyre itself. If there are sand particles or debris stuck in the groves, carefully brush or pry them out with a toothpick, paper clip or old toothbrush. Stubborn particles may require a tougher brush with thicker or metal bristles. This check is also useful to discover any sharp object which may have already partially penetrated into the tyre, pre-empting a future puncture.
Physical precautions like good tyre pressure and sealant insurance are only half the story. Good riding habits can make all the difference.
Above: As much as possible, avoid riding in wet conditions. Image: Alan Stanton
The connection between wet riding conditions and risk of puncture is not immediately obvious. But experienced cyclists will tell you that they had more punctures in wet weather or in winter.
During a wet journey, the wheels pick up small sharp particles like sand, metal debris and other bits from the road. Moisture helps these stuff to cling to the tyre and spokes. Each time you stop at a crossing, water trickles down, washing these particles to the space between your tyre and tube. Here the particles get sucked into the gap as your tube compresses and decompresses during rotation.
The sharp particles are pressed up against the one-millimetre thin synthetic rubber of the inner tube which is trying to hold in pressurized air while spinning at over 700rpm. This forms perfect conditions for sandpapering the tube. It is a surefire way to support your local tube replacement businesses.
Above: An electric scooter controller shows clear signs of water damage from repeated exposure to moisture
More importantly, wet surfaces are also more slippery and dangerous to ride on. Water can seep into the electric scooter and cause corrosion to the expensive electrical components and damage batteries. Water damage is commonly not covered by seller warranties.
Cyclists call it riding “light”. That means instead of a passive toy-soldier stiff riding posture, ride in a mindful and responsive way, using your body to respond to the ground condition.
Above: A tyre tube can withstand much more compressive shock when the rider is responsive to the ground condition.
For example, as you approach a hump, slow down and slightly bend your knees and allow the scooter to rise up under you as it crosses the hump. As you reach a bumpy stretch, raise your heels off the deck and bend your knees slightly so the bumps feel softer as they pass under. And never, ever ride off a kerb – stop and walk your scooter down, one wheel at a time.
These active riding habits take a massive amount of brute impact off the tyres. If a graph is plotted showing the air pressure inside a tube during a ride, an active riding posture will show a smoother graph with fewer sharp spikes. Less impact means fewer chances for a pinch puncture.
Riding actively also includes always choosing a sensible path or “line” for your scooter to glide through. Make it a habit to always cover the next few meters in your field of view in the smoothest, safest possible way. An adjustment just a few centimetres left or right is enough to avoid a porthole, crack on the ground or a big twig. Go around dirty spots or visible debris at kerb sides and near drains. These are gathering spots for sharp objects. Ride your scooter like a tank and it will quickly demonstrate that it isn’t.
Your ultimate objective is to delay a puncture for as long as possible and make your inner tubes last at least as long as the outer tyres. When the tyres are worn out and due for a change, take the opportunity to change the inner tube to a fresh one at the same time. The old tubes have done their job and are probably worn thin anyway.
Follow the three points of “Add Sealant”, “Inspect Regularly” and “Ride Sensibly” (acronym “AIR”) to take care of your electric scooter’s inner tubes and they will help you save money, save time and stay safe.
Above: You have succeeded when your electric scooter wheel inner tubes last as long as your tyres.
Congrats if you have survived reading up to this point! Read here for more e-scooter service and maintenance tips.
PS: found any mistakes or inaccuracies in this article? Get in touch so we can keep it updated and useful for readers.