ZERO Throttle LCD

$55.00 SGD
Throttle Type
Key Lock



ZERO 8, 9, 10, 8X, 10X, 11X Throttle LCD

The same LCD is used across all the ZERO models so this ZERO LCD applies to 8, 9, 10, 10X, 11X models. 

This tutorial only applies to the QS-S4 LCD throttle. 

Here are the extent of the settings:
1. P01 - LCD brightness level (1, 2, 3)
2. P02 - Mileage display in km or miles
3. P03 - Voltage level of machine (24, 36, 48, 52, 60V)
4. P04 - 1-60 mins before machine goes to sleep with inactivity
5. P05 - N/A
6. P06 - Wheel diameter in inches
7. P07 - No. of magnets on motor (Default 30)
8. P08 - Power Level (0-100)
9. P09 - Zero start or kickstart 
10. P10 - N/A
11. P11 - Electronic braking on or off
12. P12 - Soft or high acceleration (1 is softest start; 5 is highest torque)
13. P13 and P14 - N/A
14. P15 - Controller cutoff voltage
15. P16 - Zero-ing of ODO
16. P17 - cruise mode
17. P18 to P20 - N/A

Fault Codes:
2 - brake
4 - 6kmh cruise
6 - battery undervoltage
7 - motor faulty
8 - throttle faulty
9 - controller faulty
10 - faulty comms between controller and LCD
11 - faulty comms between controller and LCD 
12 - BMS failure
13 - headlight failure

Here is a video explanation:

Thumb Throttle Option

We have also made a custom thumb throttle option that will be easier to throttle for some users. This works the same way as the stock ZERO QS-S4 throttle except the throttle lever is pushed by the thumb instead of being triggered by the fore finger.